Forum Replies Created

Viewing 30 posts - 1 through 30 (of 169 total)
  • Ron Burgundy
    Utica MN
    Posts: 258
    #2255853

    Same ? Anybody upgrade & still have the cable?

    Ron Burgundy
    Utica MN
    Posts: 258
    #2247221

    Now I have to try to get Amazon to take mine back. Same issues you had. They referred me to 2 places to have them fix it if they could. I asked don’t you know if they will fix it? They had no idea. Beyond frustrating. They got your money and don’t care.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2247133

    My 9000 btu unit takes 5+ minutes for the white plate to fully glow. Then on lo it barely stays lit and blue flame flickers like the last few seconds b4 my Buddy runs out of gas. They will not take it back to fix it. They will not replace it. Only send parts for me to fix!!

    Ron Burgundy
    Utica MN
    Posts: 258
    #2237414

    $40 @ Scheel’s right now. Bought a 30m. Feels close to the 2B Spoon Daddy they sell for $99.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2224598

    It has the chimney hole. Only 300d nylon and old trippy doors. Says 115 sq ft fishable area though. Biggest I’ve seen.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2188604

    I really like the Ice Armor Extreme. If I ha e to buy again I’m curious about Fish Monkey $90 gloves.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2184775

    One day they’re $99.99 & 1/2 off. Sometimes they’re $50-$60. Buy 1 get 1 half off. Set a good price & run with it. All that being said I love my ICX Carbon. Haven’t got line on the Frost yet.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2184625

    According to HT it is a LT MED made for dead sticking. The back bone starts 4-5″ back from the tip. It has handled some nice bassand a couple Northern pretty easily. Polar Lite 27″ light medium.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2184051

    That’s what I’m asking. The only rods I have with a fast tip I use for a dead stick and an HT for Itty bitty baits for pan fish. The tip can’t be that whippy.. Do you really get a good feel with a fast tip?

    Ron Burgundy
    Utica MN
    Posts: 258
    #2180940

    Glow red buck shots. Our guide said that’s all he uses.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2180516

    I used a forceps and the spool came right off.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2180513

    Emailed customer service. We’ll see. It just doesn’t feel good.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2180505

    Well, it’s a little grindy and the spool won’t come off.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2180090

    I should have known that. I have that reel. That on an ACC Crappiestix hauled in a 25″ Pike on 3 lb line. No problem.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2179485

    I’m getting a Piscifun ICX Frost for walleyes. Not sure if I’ll put it on a med or ml. Drag should be good at 12 lbs and I don’t think the slower speed 2.7/1 vs 5.2/1 should be a big deal. I like the line release trigger and the Carbon I got last year is really smooth.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2179456

    I got an Amazon Prime Price of $50 on the Frost. It will be here Wednesday.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2179022

    Ordering ICX Frost soon. Good reel for walleyes?

    Ron Burgundy
    Utica MN
    Posts: 258
    #2173602

    At the moment I can’t delete the 2nd pic if the angry looking fisherman. The smaller sauger with the feed up line had my minnow in it’s mouth and still took another minnow. I just missed him maybe 1 minute earlier.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2173597

    8″ today. Got my first slab rap fish. 19″ sauger. We had 4 fis between 3 of us. A perch & small sauger on bobber rods, a 16″ sauger jigging a minnow a the 19″ sauger on the right green slab rap.

    Attachments:
    1. Resized_20230113_150528.jpeg

    2. Resized_Resized_20230113_163329.jpeg

    3. Resized_Resized_20230113_161710-1.jpeg

    4. Resized_Resized_20230113_161710.jpeg

    Ron Burgundy
    Utica MN
    Posts: 258
    #2172810

    Will it fit through tiny ice jig eyes doubled over? I was thinking of putting it on Piscifun-Crappiestix combo for when the Eyes & Saugers get tight lipped and I want to down size. I know the rod & reel will handle 25″ Pike.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2172805

    EASY walking. Lot was icy as hell. 6″ off the end of the point. 8″-10″ away from it.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2171635

    Any color that works better than others?. I usually go through everythingvI’ve got. Never caught any on a plain hook and minnow. Brightly colored Demon jigs and minnows have worked s few times.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2171338

    TENS unit. Stick those pads on and let juice flow.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2170444

    No idea but us know what you find.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2170266

    To answer my own question…it’s an awesome rod. Not as quick of a tip as say a Dead Meat. Eyes are big enough all the way to the end. It felt great on a couple 12″ drag pulling perch. A small bass too. The Piscifun reel was mooth as silk too.

    Attachments:
    1. 20221228_144744-scaled.jpg

    Ron Burgundy
    Utica MN
    Posts: 258
    #2170028

    Will an atv battery work? Less than $100. I’d only use it for my shack and hopefully loading deer.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2169261

    Beast, could you post a pic of the winch and mount please? I’ve been thinking of doing the same thing for a while now.

    Ron Burgundy
    Utica MN
    Posts: 258
    #2169172

    The guy at the HT booth said it was made for dead sticking.

Viewing 30 posts - 1 through 30 (of 169 total)