Forum Replies Created

Viewing 30 posts - 1 through 30 (of 36 total)
  • kevinh1570
    New Richmond, Wi
    Posts: 63
    #1637738

    It’s a 1700 lund so it’s rated for a 150. I’ve never paid much attention to what rpm I run, I will have to run it and see.

    Thanks for the help

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1636843

    I would say maybe just alittle more all around. Little better whole shot and maybe alittle more top end?? I’m guessing I wouldn’t get both tho right?? It’s either one or the other?? My boat has always been doggy out of the whole so it would be nice to pop up better, top speed isn’t bad but like I said if I could go alittle faster I’m not Gona complain lol.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1636841

    Yup he is letting me try it but I need to buy a hub kit before I can even try it. So I just wanted some advice frist becuase I don’t know anything about the differences in prop pitches.

    Thanks tho I might have to give them a ring.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1547732

    I have a question, my apple trees get a lot of bugs on them and they ruin most of my apples, what does everyone do to prevent this??? I would prefer to use some sort of all natural stuff

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1440806

    Yea sorry walleye, how far is pool 9 from hudson?

    Thanks

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1440730

    Was up there Friday and Saturday last weekend trolled out at 9 mile, it was definitely slow for me!!

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1432753

    Good point, but what if u can’t keep the fish??

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1432749

    So it is ok to just cut the ring if possible and leave the treble in them? Thanks for the advice!

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1415439

    Anyone try the ap yet? Wondering if its worth the money?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1415192

    Quote:


    Book yourself a trip with Brad Juaire and you will be light years ahead in your learning curve.


    X2 I would highly recommend Brad Juaire as well, he showed me a lot on leadcore and even talked me thru how to set them up when I was having difficulty at home.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1415023

    I’m curious to know how u have your lead core set-up? I have been running leadcore setups on mile lacs the last few years but would really like to turn and fish close to home with lead. I trolled up there with a 50 foot leader, I’m guessing your leader is smaller but I was hoping I wouldn’t have to chamge my setup much cause I still like heading upthere when I have the time. You can pm me if you want just curious

    Thanks

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1414040

    Aww man I’ve been waiting years to finally do the league…..well one more week won’t hurt I guess….we might get out anyways…

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1409109

    I’ve always wondered what is considered “ice out”? Is it when every piece of ice is off the lake?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1408976

    Inver grove british labs, I have had my pup for about 6months now and couldnt be happier. She should top out at about 60lbs I hope, good small breeder and good price. She is a fox red British lab.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1400646

    Thanks for the advice all!!! I will report back this summer!

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1388257

    Thanks for the feed back guys I appreciate it.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1191163

    A guy I work with told me years ago he had a hot spot for walleyes at nite ice fishing. Told me they where out fishing one nite and dnr came up and knocked on his portable and asked him what he was doing…..he responded fishing the dnr guy said u know your on a holding pond…..lol I never laughed so hard in my life…..I don’t know I thought it was a good story….

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1190217

    What kind of crankbait are u using out there?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1187614

    Nice fish! Can I ask what crank you were using and if you where running lead or not?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1186343

    I have this same exact problem on my 03 115 yamaha……what works for me when it doenst shut off is go back to the motor and shack wiring harness and it shuts right off. Its weird I don’t know why it does it either but the wire harness shack has always svut it off so I’ve never done anything more with it.

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1185490

    Very good read…I almost did the tourney in hudson afew years back and backed out. Reading this makes me want to do it, hopfully next year they do a tourney around home…..

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1185140

    Thanks guys….wish it was Saturday. Fishing beer and jerkey. ..it doesn’t get much better!

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1185076

    Thanks that should help!

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1179115

    I also have a lund fisherman and have wanted to finish off the sides and back also. Its not cheap I’m waiting to pay my boat off and its one of the first things on my list to buy. Eye that top piece is awsome being able to stand fully is a must. The wife wants the bow cushions…..I think its canvas, new prop, then bow cushions

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1173041

    Hey what kind of leader are you running on your lead? I have mine setup for 30ft leader for mille lacs I’m not sure if that’s too long for out on the croix or not?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1171523

    Wish I could of made the league this year..my wifes workin Tuesday evenings…..hard to do with a 1 and half year old…have fun I will be down there soon

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1168367

    I have a fisherman with a 115 yama I will look at my prop and get back to you but my guess its a prop problem……..did it just start havin problem or has it always ran like that?

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #1168290

    I will keep those in mind I thought I was just gonna have to go to vagas from now on if I wanna gamble. ..

    kevinh1570
    New Richmond, Wi
    Posts: 63
    #885781

    Don’t use your auger i did it and it bent my drill where the actual drill bit goes and i had to buy a whole new drill it also wrecked the drill bit. Unless you will be going thru soft stuff i would not.

Viewing 30 posts - 1 through 30 (of 36 total)