Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Ed BZ
    Amery, WI
    Posts: 11
    #1399182

    E-Mail Sent

    Ed BZ
    Amery, WI
    Posts: 11
    #1151458

    Quote:


    Nice Rig. SBC is the best dealer I have ever dealt with.



    x2 Bought my 2000T there. Awesome service!

    Ed BZ
    Amery, WI
    Posts: 11
    #1151455

    Sean@ SBC mounted 2-6″ Traxtech rails on the back end of my gunnels on my 2000T I believe there are 2 nylon washers on 1 side. They have been rock solid. Also have the plate with a pair of Scotties

    Ed BZ
    Amery, WI
    Posts: 11
    #1140844

    Prayers sent

    Ed BZ
    Amery, WI
    Posts: 11
    #1140843

    I cant even get my head around this

    Ed BZ
    Amery, WI
    Posts: 11
    #1140236

    Sweet Rig

    Ed BZ
    Amery, WI
    Posts: 11
    #965295

    Hey Lambeau,
    My transducer is about 1/2″ above the port most livewell cage. Sounds to be right were yours is. I have been having what I believe to be good-great imaging. I have had mine most of the time set at 100′ This morning I saw a school of fish on the out most fringe 90-100′ marked them, and caught some nice crappies. I am seeing breaklines, and bottom transitions well. I have spent around 100hrs between Depere, and pool 9 this spring. What amazed me the most was the detail around the powerplants. However this is the first year for the Birds. I ran LCXs in the past so I have nothing else to compare it to. Maybe Gregg, or Shawn might have some answers.

    Ed

    Ed BZ
    Amery, WI
    Posts: 11
    #963777

    I am running the same set up as yours with the factory painted stainless 17p. 3 guys full load, and fuel 37.5 before the rev limiter kicks in. I am going to have my prop pithed to 18, and have some cupping done. Hoping that will bring my rpms down to around 5900 and gain a few mph on top. I will post in a few weeks when I get the work done.

    Ed BZ
    Amery, WI
    Posts: 11
    #957392

    You could also measure how much line come off the reel with each pass of the level wind. I also have a few set ups with metered line on them suffix brand. I think power pro came out with a metered line this year as well.

    Ed BZ
    Amery, WI
    Posts: 11
    #944612

    Chad, It was great to meet you as well. Brian, I got a 2000T. I had a 1775T, and that was a great boat. I think that hull is very similar to the 1790. It tracks very well, and I had it in some nasty stuff from Gbay to Mille Lacs. If you want to go for a ride in the 2000T I would be happy to get you out. I will be fishing between pool 4, and 9 untill everything is uderwater then off to Greenbay. Thanks again Gregg, and Eric. Hopefully I will have some pics to post next weekend.

Viewing 10 posts - 1 through 10 (of 10 total)