I would like to know if this tank might have an extra feed
tube for a kicker motor. If I run the kicker for a while it seems to take the presure from my big motors line. Any suggestion would be appreciated.
thanks for the help.
The check valve in the primer bulb of the big motor is most likely not holding. I know nothing about your fuel tank. I installed a tee fitting in the tank line of my boat. I then installed stainless steel valves on each line going from the tee to the two motors. I can completely shut off which ever line is not in use.
I have a Crestliner 182 TS what I will do is just unhook the kicker fuel line. It has been an on and off issue, and my boat has a separate line with a switch.
You must be logged in to reply to this topic.
