Helix 10 Mega SI / chirp G2N network with older 1198 and 858

  • to_setter
    Stone Lake, WI
    Posts: 581
    April 30, 2018 at 12:46 pm #1771474

    I just purchased a Helix 10 Mega SI / chirp G2N and plan to keep my current 1198 and 858 units which are currently connected through a hub. I’m assuming the new Helix will connect to the hub as well, and I just swap the old SI 1198 ducer for the new Mega SI ducer. Does that sound about right? Anyone have any idea how much these new and older units will interact? What screens can be shared, etc?

    Dave Lagman
    Posts: 3
    May 7, 2018 at 1:10 pm #1773151

    You will be able to share everything except mega DI/SI. If you turn down the frequency on the Helix for SI/DI, then that will share as well. 2d, waypoints, and low frequency DI/SI shares perfectly through the network hub.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.