Lowrance GPS Module Gasket

  • slammin eyes
    Oakdale, MN
    Posts: 55
    June 16, 2010 at 1:57 am #1306673

    Does anyone have any idea where I might be able to find the rubber o-ring gasket used on Lowrance LGC-12 GPS Module? I know it is approximately 3″ in diameter. I called Lowrance and Reeds Sports to no avail. I realize that silicone sealer would likely work as well, but would prefer a gasket. Any help would be appreciated.

    stuwest
    Elmwood, WI
    Posts: 2254
    June 16, 2010 at 2:27 am #880366

    If it’s a full circle, you can probably go to NAPA and get one.

    If it’s the one with the ‘bolt hole notch outs’ then i can’t help you…

    sorry.

    John Gildersleeve
    Frazee,MN
    Posts: 742
    June 16, 2010 at 3:50 am #880384

    You can also buy a rubberized corked gasket material they use on car engines and cut out what you need. Napa should have the stuff you need.

    sauger
    Hastings ,MN
    Posts: 2442
    June 16, 2010 at 2:55 pm #880489

    I would bet you could use an oil filter gasket.

    ted-merdan
    Posts: 1036
    June 16, 2010 at 5:33 pm #880549

    i should have an extra – pm me and I will check.

    -ted

    slammin eyes
    Oakdale, MN
    Posts: 55
    June 17, 2010 at 1:11 pm #880731

    Thanks to all who replied!! I have found someone that has extra. Good Fishing!!

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.