Rod Holder Options for Older Boat with low Gunnel Clearance

  • lrott2003
    Wisconsin
    Posts: 508
    May 11, 2022 at 8:26 pm #2123747

    I have an Alumacraft Lunker 165 year is 2003 with limited gunnel space.

    Looking to see what the IDO world suggest in terms of rod holders. I do some trolling with planer boards (3 on each side of boat) and currently have flesh mounted ones but the spacing is to tight to really keep the rods separate in my boat. I am looking at options like clamps or something to use with rod holders to help and thought that someone would have encountered the same issue and had suggestions.

    Attachments:

    1. 20220415_131351096_iOS-scaled.jpg

    2. 20220415_154617259_iOS-scaled.jpg

    Bob Bowman
    MN
    Posts: 3542
    May 11, 2022 at 8:49 pm #2123751

    Mount ram balls on the floor, just inside of the gunnel. You can put a few ram arms and rod holders that can be interchangeable. I did this on my jet boat and it’s working great 👍

    Bob Bowman
    MN
    Posts: 3542
    May 13, 2022 at 11:55 am #2124239

    Here are the pics you requested. Let me know if you have any questions

    Attachments:

    1. 20220513_114656-scaled.jpg

    2. 20220513_114926-scaled.jpg

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.