soldMinnkota terrova 24v 80pound 60inch shaft bow mount trolling motor

  • walleyeguy1234
    Posts: 68
    #2263776

    Like the title says, bought a boat and want to upgrade to a 36v, trolling motor is in great condition

    1100$

    24v 80p bow mount trolling motor, comes with foot control and hand controll, has spot lock/anchor etc

    Can txt or email pics

    Jerry Krieger
    Posts: 18
    #2263811

    Like the title says, bought a boat and want to upgrade to a 36v, trolling motor is in great condition, will throw in 2 27 serie batteries and 2 bank charger.

    1100$

    24v 80p bow mount trolling motor, comes with foot control and hand controll, has spot lock/anchor etc

    Can txt or email pics

    walleyeguy1234
    Posts: 68
    #2263838

    2012 it seems

    Attachments:
    1. 20240327_111740-scaled.jpg

    buckybadger
    Upper Midwest
    Posts: 7347
    #2263843

    Somewhat related side track here…

    My Brother in Law tasked me with looking for a used 24V terrova for his cabin fishing boat. Which generation/year was the “bad” version? I’ve asked before and gotten a handful of different answers. From what I remember it was the second generation that had spotlock overcorrecting and struggled to hold a consistent spot…but have no ideas what years this spanned

    walleyeguy1234
    Posts: 68
    #2263845

    Spot lock worked great when i was out last week

    buckybadger
    Upper Midwest
    Posts: 7347
    #2263848

    Shooting from the hip, but if it’s 2012 I’m assuming you have the first generation of spot lock which was solid? I think it’s the next one that went downhill?

    walleyeguy1234
    Posts: 68
    #2263874

    Im not sure tbh, i did test and this one works good

    nord
    Posts: 699
    #2263974

    buckybadger, I believe you are correct on the second generation Terrova.

    Anon Ymous
    Posts: 4
    #2264141

    Can anyone help me to locate a replacement propeller for my Minnkota 15 ? Prop hub (outside) diameter = 1-1/8″, shaft diameter = 5/16″, hub depth = 1/2″, Outside diameter of prop = 4-3/8″. Prop shaft is not threaded on the end to accept a nut, the Prop is secured to shaft by (machine fit) shear pin only, (or Cotter Pin only). This trolling motor is ~ 30 years old, and is in perfect condition less the missing prop. Any assistance or recommendations would be greatly appreciated. Thank you

    Krh129
    Posts: 136
    #2264144

    Try The Motor Clinic in Bloomington.

    Anon Ymous
    Posts: 4
    #2264150

    Thank you for the recommendation.

Viewing 15 posts - 1 through 15 (of 15 total)

The topic ‘Minnkota terrova 24v 80pound 60inch shaft bow mount trolling motor’ is closed to new replies.