My 520 just started acting up when on the map page with the cursor. If I zoom in on my location after about 5 seconds it will automatically zoom out to the whole state. When I move the cursor so that it is not tracking my location I can zoom in and it stays as it should? Been flawless thus far? Any others experience this? Thanks
IDO » Forums » Fishing Forums » Toys for Big Boys » Lowrance Electronics » Lowrance mapping issue
Lowrance mapping issue
-
July 13, 2010 at 2:45 am #886288
Try a soft reset, I am away from my info on how to do it but im sure someone will chime in or you should be able to google it as well. Best luck, Mark
July 13, 2010 at 11:42 am #886350Not sure if this will help, but here’s reset instructions. Worth a try
LMS 520C Reset
Soft Reset (Does not delete GPS Data)
1. Turn unit OFF
2. Press and hold the PAGES key
3. Press and hold the PWR key
4. Release both buttons when the USA map appearsHard Reset (Deletes stored GPS Data such as Waypoints and trails)
1. Turn unit OFF
2. Press and hold the ZIN&ZOUT Keys at the same time
3. Press and hold the PWR key
4. Release both buttons when the USA map appearsGood Luck!
July 13, 2010 at 2:54 pm #886400Had the same problem on my 332c, I can not remember what I did but it was in the settings had something to do with the preset zoom or something like that. If I think of it i will chime back.
You must be logged in to reply to this topic.