sticky bunks

  • jwfilm1
    Aitkin, MN
    Posts: 160
    April 21, 2006 at 4:17 am #1249854

    Any tricks to making my bunk trailer easier to unload a boat? I’m used to a roller trailer in shallow water. WD-40? Silicone? PAM?

    birddog
    Mn.
    Posts: 1957
    April 21, 2006 at 4:26 am #440046

    Silicon Spray. Apply it when the bunks are dry and allow the spray some time to dry also. Works well.

    BIRDDOG

    sliderfishn
    Blaine, MN
    Posts: 5432
    April 21, 2006 at 4:28 am #440047

    I do not know of sprays that will work but I have seen THESE at Cabelas.

    Ron

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    April 21, 2006 at 11:05 am #440055

    The plastic slide things work well, but almost too well. Depending on the boat, you can slide one off in the parking lot just like on a roller trailer. Does make it a lot easier to get the boat off on a shallow ramp though.

    GNFISN
    Posts: 208
    April 21, 2006 at 12:19 pm #440072

    Without a doubt , silicone in a spray can . I used it last year , you have to keep the boat hooked till you are in the water or it will slide off – good stuff- I used the Johnson/Evinrude brand , but they are probably all similar.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.