Universal Sonar Cable for LMS-520c ??

  • akockelm
    Metro MN
    Posts: 69
    April 3, 2007 at 6:36 pm #1235096

    Can anyone confirm the universal sonar cable part number that will work with the LMS-520c? I’m guessing it is the MKR-US-5, but the LMS-520c isn’t mentioned specifically on Minnkota’s web site. Thank you.

    timdomaille
    Rochester Mn
    Posts: 1908
    April 3, 2007 at 8:15 pm #556479

    AJ. Your cable number is correct. It uses the same as a 332.

    jon_jordan
    St. Paul, Mn
    Posts: 10908
    April 3, 2007 at 8:20 pm #556482

    You need the MKR-US2-10 connector.

    -J.

    wade_kuehl
    Northwest Iowa
    Posts: 6167
    April 3, 2007 at 8:27 pm #556485

    They are both correct. If you run an older (2006 or earlier) motor, you need the MKR-US-5.

    If you run a new 2007 motor with the new US2, you need the MKR-US2-10.

    Clear as mud?

    jon_jordan
    St. Paul, Mn
    Posts: 10908
    April 3, 2007 at 8:30 pm #556487

    And if you need the “10” plug, good luck getting one in a hurry. Wade, got any?

    -J.

    nick
    Lakeville, MN
    Posts: 4977
    April 3, 2007 at 10:26 pm #556528

    I got a “10” for my US2 and 337 But it was tough to get that was for sure, luckily I got mine about a month ago, probably before most people started picking up the new minnkota’s, but I still had to call around.

    I actually ended up using my ice ducer for a day or two before hand, it actually works nearly as good as the US, atleast I think so.

    akockelm
    Metro MN
    Posts: 69
    April 4, 2007 at 2:18 am #556640

    I don’t have the US v2, so the MKR-US-5 sounds like the one for me. Thanks for the help

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.