Omoto Bait Cast Reels

  • walleyejgr
    Posts: 281
    February 1, 2011 at 3:36 pm #1222170

    Need to check these out.Supposed to be better built than the 7000c3i. 22lb drag 3 bearing infinate anti-reverse 5.5/1 gear ratio
    ALL METAL internal gearing.High capasity line 390/20lb.2 year warranty.Price point is good as well around 89 dollars. Have made some phone calls,emails and getting back very positive feedback on the reels

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59944
    February 1, 2011 at 3:48 pm #932339

    Quote:

    infinate anti-reverse

    One of these days I’m going to have to figure out what the difference is between “infinate” and “instant” anti-reverse.

    walleyejgr
    Posts: 281
    February 1, 2011 at 4:24 pm #932352

    Quote:

    Quote:

    infinate anti-reverse

    One of these days I’m going to have to figure out what the difference is between “infinate” and “instant” anti-reverse.

    Redneck defanition- it don’t turn backwards

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59944
    February 1, 2011 at 5:52 pm #932374

    Well…yeah. Two company’s that don’t want to use the same words?

    Line out alarm/clicker
    Drag/Brake
    All metal/no plastic

    Same thing, different words?

    walleyejgr
    Posts: 281
    February 1, 2011 at 6:17 pm #932380

    Quote:

    Well…yeah. Two company’s that don’t want to use the same words?

    Line out alarm/clicker
    Drag/Brake
    All metal/no plastic

    Same thing, different words?

    What’s that clicking noise?

    walleyejgr
    Posts: 281
    February 1, 2011 at 7:15 pm #932412

    That would be them.Thanks for posting that

    farmboy1
    Mantorville, MN
    Posts: 3668
    February 1, 2011 at 7:36 pm #932431

    Is that a misprint on the weight of the 7000 is 56 oz? 3.5 lbs seems a little much for a reel

    walleyejgr
    Posts: 281
    February 1, 2011 at 8:00 pm #932438

    Quote:

    Is that a misprint on the weight of the 7000 is 56 oz? 3.5 lbs seems a little much for a reel

    7000AB3 is 14.1 oz

    mplspug
    Palmetto, Florida
    Posts: 25025
    February 1, 2011 at 8:08 pm #932440

    How about Level Wind on some reels? What’s that? Anybody here have issues with unleveled breezes and gusts?

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11710
    February 1, 2011 at 8:10 pm #932443

    Quote:

    Is that a misprint on the weight of the 7000 is 56 oz? 3.5 lbs seems a little much for a reel

    Yeah, it’s bigger than most of the fish you catch

    mplspug
    Palmetto, Florida
    Posts: 25025
    February 1, 2011 at 8:55 pm #932457

    Quote:

    Quote:

    Is that a misprint on the weight of the 7000 is 56 oz? 3.5 lbs seems a little much for a reel

    Yeah, it’s bigger than most of the fish you catch


    I didn’t post that.

    -doh!

    dfresh
    Fridley, MN
    Posts: 3053
    February 2, 2011 at 2:39 am #932591

    But you easily could have Pug.

    dtro
    Inactive
    Jordan
    Posts: 1501
    February 2, 2011 at 2:00 pm #932691

    With a name like Omoto and Ming Yang, can you say Chinese knockoff?

    http://bottomdwellerstackle.com/reels.htm

    I’m sure they work fine and probably are a decent reel, but you just gotta love when original ideas (Abu Garcia) are blatently ripped off and sold for less because of cheap labor.

    Hard to argue with the price though.

    dfresh
    Fridley, MN
    Posts: 3053
    February 2, 2011 at 2:27 pm #932704

    Followed that link and I think I just found a good place to order no-rolls through!

    farmboy1
    Mantorville, MN
    Posts: 3668
    February 2, 2011 at 3:46 pm #932740

    Quote:

    Quote:

    Is that a misprint on the weight of the 7000 is 56 oz? 3.5 lbs seems a little much for a reel

    Yeah, it’s bigger than most of the fish you catch

    I just wish I could catch a fish

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59944
    February 2, 2011 at 3:59 pm #932745

    Rule #1 in catching fish Farmboy…is to go fishing.

    farmboy1
    Mantorville, MN
    Posts: 3668
    February 2, 2011 at 4:58 pm #932777

    Quote:

    Rule #1 in catching fish Farmboy…is to go fishing.

    I will crawl back into my hole now.

    mplspug
    Palmetto, Florida
    Posts: 25025
    February 2, 2011 at 5:05 pm #932780

    Quote:

    I will crawl back into my hole now.


    There is a trick! I bet you could make a lot of money on the internet if you video taped that and uploaded it to YouTube.

    Is it Spring yet?

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59944
    February 2, 2011 at 5:38 pm #932797

    I’m not sure they would allow that Pug.

    …and…no, not yet.

    joshbjork
    Center of Iowa
    Posts: 727
    February 2, 2011 at 7:54 pm #932882

    Quote:

    With a name like Omoto and Ming Yang, can you say Chinese knockoff?

    http://bottomdwellerstackle.com/reels.htm

    Hard to argue with the price though.

    The thing is, the abus just got farmed out to china. The design is super old. And the knock offs aren’t really that cheap.

    I’m sure they work fine and probably are a decent reel, but you just gotta love when original ideas (Abu Garcia) are blatently ripped off and sold for less because of cheap labor.

    I odered some sinkers from there last year. It was sweet not having to pay $1 each + time + gas. And I actually got the sinkers I wanted, not whatever the one mold some bait shop guy has.

    dtro
    Inactive
    Jordan
    Posts: 1501
    February 2, 2011 at 8:04 pm #932887

    I hear ya Josh, and that guy has some decent prices on his sinkers.

    For some reason though, Abu Garcia rolls off the tongue better than Ming Yang.

    But yeah, most everything is headed to China, just have to roll with it I guess.

    Jerry Hochhausen
    Madison, Wisconsin
    Posts: 275
    February 4, 2011 at 8:54 pm #933869

    I have met and fished with the guy who owns Bottom Dwellers Tackle(Dave Ashby). He’s a great guy and has a great line of catfishing equipment. His prices are great too. I got to see the Omoto and the Ming Yang reels that Dave brought to a skip jack fishing get together in Cumberland City Tennessee this New Years weekend. They are really nice reels. That Ming Yang CL60 for just over $40.00 is an amazing reel. Very smooth and built solid. When I need reels, that’s the reel I’ll be buying for catfishing.

    walleyejgr
    Posts: 281
    February 5, 2011 at 4:23 am #933930

    Ya Dave is good people,and his service and knowledge is top shelf.Good o’l southern hospitallity! Waiting for the big brown truck and I’ll give a update on the Omoto reels.

Viewing 24 posts - 1 through 24 (of 24 total)

You must be logged in to reply to this topic.